Stiegelmeyer

LATERAL tilting.
The Sicuro pesa can be laterally tilted on either side – up to 25°.

MANUAL adjustment: BACK REST and LOWER LEG REST.
The back and lower leg rests can also be adjusted smoothly by hand.

FOOT PEDAL
If you need your hands free, the foot pedal can be easily reached and ensures comfortable adjustment of height*.

INCLINOMETER
The degree of adjustment of the back rest, shock position and lateral tilt can be indicated by using an inclinometer.

FAST and SAFE.
The Sicuro pesa uncompromisingly puts functionality and ergonomy of use in first place. All the adjustment functions can be reached centrally from the side of the bed. The bed reaches its highest position after only 16 seconds.

MASTERLY
The safe working load of 260 kg is proof that the Sicuro pesa also copes easily with large loads.

QUICKLY reached: SHOCK POSITION and CPR POSITION.
The Sicuro pesa creates a shock position or CPR position promptly at the press of a button – and it remains comfortable, even when the fast release lever is activated.

Easy OPERATION.
The CPR emergency switches are integrated on both sides by the middle support to enable prompt reaction. The operating part is easy to understand and can be comfortably attached to the side rails or the foot section.

MultiFlex-SIDE RAILS.
MultiFlex unites all the requirements of a modern side rail system and does not look like bars. The side rail system has a protection height of 425 mm and is easy to operate and fully collapsible. The whole operation takes place in the vertical plane, so nursing staff can work easily in a confined space.

EASY LOWERING of the MultiFlex side rails.
Using only the same number of turns of the hand as used to pull up the side rails, they can be lowered again. The same applies to the mobilisation supports if they are not needed: unbolt, lower, ready.

WELL DESIGNED: ready to use for EVERYDAY hospital life.
In everyday hospital life, it can quickly be seen whether a hospital bed is well designed – we have thought everything through. The Sicuro pesa C-bar can be lowered and the back rest is radio-transparent.
Patients can therefore undergo X-rays with having to leave the bed.

X-RAY CASSETTE HOLDER
The X-ray cassette holder available under the back rest is optional.

BED SCALES
An integrated optional bed scale can also monitor the patient’s weight very precisely. It is accurate to within 50 g (100 g from 150 kg)**.

EQUIPPED for ward use.
The mattress base can be very easily extended by unfolding the head end. This creates space very quickly for intensive care treatment.

BED EXTENSION
It is also easy to extend the length of the bed at the foot.

Flexible POSITIONING.
At all four corners of the bed there are also holders for infusion stands to ensure the flexible positioning of infusions and irrigations.

Stainless steel SLIDING RAIL.
The mattress holder at the back rest can be replaced by a stainless steel sliding rail if required.

All round PROTECTION.
Even damage protection was considered from the beginning.
The stainless steel sliding rails are positioned so that they provide additional protection to the long side.

TUBE HOLDER
The standard tube holder on the MultiFlex side rails allows leads to be changed safely and cleanly.

Safe HOLD.
The tubes at each end of the bed are made from very strong stainless steel – this provides a safe hold for optional peripheral pieces of equipment as well.